MILWAUKEE Electro-Magnetic Drill Press


 1 ¼” - Drill motor model 4297-1 – magnetic base model 4231 – reversible – variable speed
FEATURES
1-1/4 inch capacity, 11.5 amp motor, 500/250 RPM
Dual Mount Gear Case/Reverse Mount for tight quarter drilling
Taps up to 1 inch-14 threaded hole
Develops up to 1600 pounds of drill point pressure with a 1 inch steel plate
SPECS
Voltage 120 AC Only
Drill Capacity 1-1/4 in.
Amps 11.5
No Load Speed 500/250 RPM
Tap Capacity 1 in.-14
Drill Point Pressure 1,530/1,600 lbs.
Tool Weight 92.0 lbs.
Shipping Weight 95.0 lbs.

Milwaukee 4297-1 Magnetic Drill Press Motor Features:

• All Motors Include Reverse For Compatability With The Electromagnetic Drill Stand Control Panel
• Dual Mount Gear Case - Permits reverse mounting of drill for close quarter work
• 11.5 AMP Milwaukee Motor
• 1-1/4 Inch Drill Capacity
• Two Speed Drill: 500 / 250 No Load RPM
• 1"-14 Tap Capacity
• No. 3 Morse Taper Arbor
• 1530/1600 Lbs. Drill Point Pressure - When applied on a 1 inch thick steel plate with the chuck mounted closest to the base. Values listed are for the drill motor mounted on a No. 4202 base/No. 4203 base that is adjusted to the rearward position.
• 120 Volt AC Only
• Motor Weight 23.0 Lbs.

Tested as far as motor runs smoothly, forward and reverse, magnet engages. Looks to be in great condition. Otherwise sold as is. 

Buyer pays actual crating and shipping charges.  Courier can take to Miami for $50.